BE-DUL0501 In-ground Light 5 W 316 Stainless Steel
BE-DUL0501 is an LED driveover up light intended for outdoor in-ground, recessed, path and decking installation. It is offered in two versions: BE-DUL0501A featuring a round face cover and BE-DUL0501B featuring a square face cover. The 5 W LED produces 550 lm with beam angle choices of 24° / 40° / 60° and color temperature options of 2700 K / 3000 K / 4000 K. Electrical input is 12/24 V DC through a built-in DC driver complete with a 2 m power cable. For this model the input wattage must be 3 times higher than the rated LED wattage to ensure LED start-up. Installation uses a D57 cut-out for deck mounting, a recessed depth of 105 mm and an overall product size of Ø64 × 101 mm, rated IP67. Typical applications include pathways, wooden decks, stone paving and architectural features in gardens, parks and commercial outdoor areas, all served by the 316 Stainless Steel housing in a satin finish. JB2001 and JB3001 junction boxes, a WUAS01 mounting sleeve with a D60 cut-out and the DUAG01F / DUAG01W anti-glare lenses round out the optional accessory list. MOQ is 100 pieces, warranty 3 years.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Description:
BE-DUL0501 is an LED driveover up light intended for outdoor in-ground, recessed, path and decking installation. It is offered in two versions: BE-DUL0501A featuring a round face cover and BE-DUL0501B featuring a square face cover. The 5 W LED produces 550 lm with beam angle choices of 24° / 40° / 60° and color temperature options of 2700 K / 3000 K / 4000 K. Electrical input is 12/24 V DC through a built-in DC driver complete with a 2 m power cable. For this model the input wattage must be 3 times higher than the rated LED wattage to ensure LED start-up. Installation uses a D57 cut-out for deck mounting, a recessed depth of 105 mm and an overall product size of Ø64 × 101 mm, rated IP67. Typical applications include pathways, wooden decks, stone paving and architectural features in gardens, parks and commercial outdoor areas, all served by the 316 Stainless Steel housing in a satin finish. JB2001 and JB3001 junction boxes, a WUAS01 mounting sleeve with a D60 cut-out and the DUAG01F / DUAG01W anti-glare lenses round out the optional accessory list. MOQ is 100 pieces, warranty 3 years.
The BE-DUL0501 and the BE-DUL0301 share one 316 Stainless Steel housing: the same Ø64 × 101 mm driveover body, the same 12/24 V DC built-in driver and the same D57 deck cut-out, so the decision comes down to output level and beam reach. This 5 W version delivers 550 lm with beams stepping from 24° up to 60°, which suits accent effects on shrubs, columns and facade bases along driveways and access routes. For the low-output twin marking paths at 250 lm, see the BE-DUL0301 3 W stainless steel driveover in-ground light. For the aluminium walkover alternative of the same power class in areas without vehicle traffic, see the BE-WUL0501 5 W aluminium walkover in-ground light.
Features:
1. The 5 W LED puts out 550 lm with a choice of 24° / 40° / 60° beams.
2. Input wattage runs at 3 times the LED rating on the built-in 12/24 V DC driver, with a 2 m cable supplied.
3. A D57 cut-out, 105 mm recessed depth and the Ø64 × 101 mm body define the installation envelope.
4. Satin 316 Stainless Steel carries the durability side, backed by an IP67 rating.
Product parameters:
| Model | BE-DUL0501A | BE-DUL0501B |
| Face Version | Round face cover / Square face cover | Round face cover / Square face cover |
| Materials | 316 Stainless Steel | 316 Stainless Steel |
| Power | 5 W | 5 W |
| Luminous Flux | 550 lm | 550 lm |
| Beam Angle | 24° / 40° / 60° | 24° / 40° / 60° |
| Input Voltage | 12/24 V DC (built-in driver) | 12/24 V DC (built-in driver) |
| Color Temperature | 2700 K / 3000 K / 4000 K | 2700 K / 3000 K / 4000 K |
| Cut-out | D57 | D57 |
| Recessed Depth | 105 mm | 105 mm |
| Size | Ø64 × 101 mm | Ø64 × 101 mm |
| Finish | Satin 316 Stainless Steel | Satin 316 Stainless Steel |
| IP Rating | IP67 | IP67 |
| Warranty | 3 Years | 3 Years |
| MOQ | 100 | 100 |
See our inground light waterproof specification guide for detailed material, IP and beam selection criteria.
Face Versions:
Version A (BE-DUL0501A): round face cover, a circular satin rim that reads calm in gravel joints and curved stone layouts (shown in the product image above).
Version B (BE-DUL0501B): square face cover, four straight edges that pick up the geometry of timber decking and cut stone (shown in the second image below).
Product Size:
Beam Angle & Illuminance Diagram:
Optional Optical Accessories:
DUAG01F frosted glass lens and DUAG01W silk-screen glass lens (Ø30.5 × 8 mm) are available as optional optical accessories for glare control and beam shaping.
Optional Accessories:
Hot Tags: 5W driveover inground light, 550 lumen driveover light, 316 stainless steel well light, stainless steel driveover uplight, IP67 driveway in-ground light, 24 degree beam driveover light, D57 cut-out well light, driveway deck lighting, round square face driveover light, satin stainless steel inground light, commercial driveway lighting, vehicle area inground up light, China inground light supplier
