12x12 mm Side Emitting LED Neon Flex GM-A2835Y-120-X-IPX 12/24 V

12x12 mm Side Emitting LED Neon Flex GM-A2835Y-120-X-IPX 12/24 V

The GM-A2835Y-120-X-IPX side emitting LED neon flex sends light out of a narrow side edge inside a 12x12 mm silicone profile. The single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K; the GM-A2835CW-120-X-IPX variant switches between 2700 K and 6500 K on the same body. Both models cut every 25 mm or 50 mm on a 5 mm board with a 120 degree beam angle. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs, serving edge lighting, shelf lines, mirror outlines and signage channels where a slim, even line of light matters. Supplied by HYDGET, luminaire supplier in China.

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction
  • The Full Range
  • Lighting & Bending
  • FAQ

 

12×12 mm Side Emitting LED Neon Flex GM-A2835Y-120-X-IPX

This side emitting LED neon flex sends the light out of a narrow side edge inside a 12x12 mm silicone profile. The GM-A2835Y-120-X-IPX single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. A dual color temperature version is available on the same body.

 

The Full 12x12 Side Emitting Range

 

Two models cover this profile. Pick the single color version with any color temperature from 2700 K to 6500 K, or the dual color temperature version switching between 2700 K and 6500 K, and the sealing grade from IP20 to IP68 per order.

 

Model Input voltage (V) Lamp bead model Number of LED Colour (K) CRI (Ra) Cutting length(mm) Plate width (mm)
GM-A2835Y-120-X-IPX 12V/24V 2835 120 2700-6500 80/90 25/50 5
GM-A2835CW-120-X-IPX 12V/24V 2835 120 2700/6500 80/90 25/50 5

 

 

Lighting & Bending

 

Lighting Direction (Side Emitting)

The vertically mounted LED board sits inside the profile, so the light leaves through the narrow side edge in a controlled 120 degree beam, keeping the glowing line thin and the light aimed along the surface.

 

lighting-direction-diagram-of-12x12mm-side-emitting-neon-flex

 

Bends Into Shapes

The silicone body bends into horizontal lines, geometric patterns and custom shapes, and the strip holds the line on the wall with the flexible profile accessory.

 

horizontal-line-patterns-of-12x12mm-side-emitting-neon-flex

 

Profile Dimensions

The profile measures 12 x 12 mm with the light exit on the narrow side edge, the LED board is 5 mm wide, and the beam angle is 120 degrees.

 

dimension-drawing-and-specifications-of-12x12mm-side-emitting-neon-flex

 

Mounting Accessories

Every run is finished with square end caps (with or without cable hole) and aluminum mounting clips; a surface aluminum profile covers straight runs and the flexible profile carries the strip around curves.

 

mounting-accessories-for-12x12mm-side-emitting-neon-flex

 

 

Frequently Asked Questions

 

FAQ

What does side emitting mean on this neon flex?

The LEDs sit on a vertically mounted board inside the profile, so the light leaves through the narrow side edge instead of the wide front face. The strip lights edge-on, which keeps the glowing line thin.

Where does a 12x12 mm side emitting neon flex fit?

Edge lighting, shelf lines, mirror outlines, signage channels and shallow coves, where the strip cannot sit face-up and the visible light line must come from a thin edge.

Which voltages does it run on?

12 V or 24 V, both available on the same profile.

What color temperatures can I order?

Any value from 2700 K to 6500 K on the single color model, or the dual color temperature model switching between 2700 K and 6500 K.

Is there a dual color temperature version?

Yes. The GM-A2835CW-120-X-IPX switches between 2700 K and 6500 K on the same 12x12 mm side emitting body, also at 120 LEDs per metre on 12 V or 24 V.

Can it bend into shapes?

Yes. The silicone jacket bends into horizontal lines, geometric patterns and other shapes, and the flexible profile accessory holds the line on the wall.

 

Certifications

 

certification-icons-of-12x12mm-side-emitting-neon-flex

 

 

 
Start your side emitting project

Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.

write to us
Quote and datasheet on request
project support
Layout and bending drawings
WhatsApp
Fast replies for project queries
Contact now
Selection within 24 hours

 

Contact now

Hot Tags: GM-A2835Y-120 neon flex, side emitting neon flex, 12x12 mm neon flex, 2835 side view LED strip, dual color temperature neon flex, 120 LEDs per metre neon flex, 12V 24V neon flex light

You Might Also Like

(0/10)

clearall