5x15 mm Front Emitting LED Neon Flex GM-H2835Y-120-X-IPX 12/24 V
The GM-H2835Y-120-X-IPX front emitting LED neon flex sends light straight out of the wide front face of a 5x15 mm silicone profile. The single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K. The GM-H2835CW-120-X-IPX dual color temperature model shares the same body and switches between 2700 K and 6500 K. Both cut every 25 mm or 50 mm on a 12 mm board with a 120 degree beam angle. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs, serving counter edges, kick lines, shelf trims, signage backlights and other front facing lines. Supplied by HYDGET, luminaire supplier in China.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
- The Full Range
- Lighting & Bending
- FAQ
5×15 mm Front Emitting LED Neon Flex GM-H2835Y-120-X-IPX
This front emitting LED neon flex sends the light straight out of the wide front face of a 5x15 mm silicone profile. The GM-H2835Y-120-X-IPX single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. A dual color temperature version is available on the same body.
The Full 5x15 Front Emitting Range
Two models cover this profile. Pick the single color version with any color temperature from 2700 K to 6500 K, or the dual color temperature version switching between 2700 K and 6500 K, and the sealing grade from IP20 to IP68 per order.
| Model | Input voltage (V) | Lamp bead model | Number of LED | Colour (K) | CRI (Ra) | Cutting length(mm) | Plate width (mm) |
| GM-H2835Y-120-X-IPX | 12V/24V | 2835 | 120 | 2700-6500 | 80/90 | 25/50 | 12 |
| GM-H2835CW-120-X-IPX | 12V/24V | 2835 | 120 | 2700/6500 | 80/90 | 25/50 | 12 |
Lighting & Bending
Lighting Direction (Front Emitting)
The LED board sits flat inside the profile, so the light leaves through the wide front face in a controlled 120 degree beam, washing the light straight out of the glowing face instead of a narrow edge.
Bends Into Shapes
The silicone body coils into circles and smooth curves while keeping an even line of light, and the plastic mounting clips hold the shape in place on the wall.
Profile Dimensions
The profile measures 5 x 15 mm with the light exit on the wide front face, the LED board is 12 mm wide, and the beam angle is 120 degrees.
Mounting Accessories
Every run is finished with end caps (with or without cable hole) and plastic mounting clips that hold the line in place on the wall.
Frequently Asked Questions
FAQ
What does front emitting mean on this neon flex?
The LEDs sit on a board laid flat inside the profile, so the light leaves through the wide front face instead of a narrow side edge. The strip lights face-on, which washes the light straight out of the glowing face.
Where does a 5x15 mm front emitting neon flex fit?
Counter edges, kick lines, shelf trims, signage backlights and other front facing lines where the strip sits face-out and the light must wash forward.
Which voltages does it run on?
12 V or 24 V, both available on the same profile.
What color temperatures can I order?
Any value from 2700 K to 6500 K on the single color model, or the dual color temperature model switching between 2700 K and 6500 K.
Can I switch between two color temperatures?
Yes. The GM-H2835CW-120-X-IPX dual color temperature model toggles between 2700 K and 6500 K, keeping the same 5x15 mm front emitting body.
Can it bend into shapes?
Yes. The silicone jacket coils into circles and smooth curves, and the plastic mounting clips hold the shape on the wall.
Certifications
Start your front emitting project
Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.
Hot Tags: GM-H2835Y-120 neon flex, front emitting neon flex, 5x15 mm neon flex, 2835 top view LED strip, 12V 24V neon flex light, 2700K to 6500K neon flex, dual color neon flex, 120 degree beam angle neon flex
