8x15 mm Side Emitting LED Neon Flex GM-A2835Y-120-X-IPX 12/24 V
The GM-A2835Y-120-X-IPX side emitting LED neon flex sends light out of a narrow side edge inside an 8x15 mm silicone profile. It runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K. The strip cuts every 25 mm or 50 mm on a 5 mm board, and the wide 270 degree beam angle spreads the edge light across larger surfaces. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs, serving edge lighting, shelf lines, mirror outlines and signage channels where a slim, even line of light matters. Supplied by HYDGET, luminaire supplier in China.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
- The Full Range
- Lighting & Bending
- FAQ
8×15 mm Side Emitting LED Neon Flex GM-A2835Y-120-X-IPX
This side emitting LED neon flex sends the light out of a narrow side edge inside an 8x15 mm silicone profile. The GM-A2835Y-120-X-IPX runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. The wide 270 degree beam angle spreads the edge light across larger surfaces.
The Full 8x15 Side Emitting Range
This profile ships in one model. Pick any color temperature from 2700 K to 6500 K on the single color version, and the sealing grade from IP20 to IP68 per order.
| Model | Input voltage (V) | Lamp bead model | Number of LED | Colour (K) | CRI (Ra) | Cutting length(mm) | Plate width (mm) |
| GM-A2835Y-120-X-IPX | 12V/24V | 2835 | 120 | 2700-6500 | 80/90 | 25/50 | 5 |
Lighting & Bending
Lighting Direction (Side Emitting)
The vertically mounted LED board sits inside the profile, so the light leaves through the narrow side edge across a wide 270 degree beam, keeping the glowing line thin while spreading it over a broad surface.
Bends Into Shapes
The silicone body bends into S curves, letters and custom patterns, and the strip holds the shape on the wall with the flexible profile accessory.
Profile Dimensions
The profile measures 8 x 15 mm with the light exit on the narrow side edge, the LED board is 5 mm wide, and the beam angle is 270 degrees.
Mounting Accessories
Every run is finished with end caps (with or without cable hole), fixed by aluminum mounting clips, and the flexible profile carries the strip around curves.
Frequently Asked Questions
FAQ
What does side emitting mean on this neon flex?
The LEDs sit on a vertically mounted board inside the profile, so the light leaves through the narrow side edge instead of the wide front face. The strip lights edge-on, which keeps the glowing line thin.
Where does an 8x15 mm side emitting neon flex fit?
Edge lighting, shelf lines, mirror outlines, signage channels and shallow coves, where the strip cannot sit face-up and the visible light line must come from a thin edge.
Which voltages does it run on?
12 V or 24 V, both available on the same profile.
What color temperatures can I order?
Any value from 2700 K to 6500 K, picked per order.
What does the 270 degree beam angle change?
The light exits through the narrow side edge across 270 degrees, so the glow spreads over a broader surface than narrow-beam side emitting profiles, which suits backlit panels and shallow coves.
Can it bend into shapes?
Yes. The silicone jacket bends into S curves, letters and other patterns, and the flexible profile accessory holds the shape on the wall.
Certifications
Start your side emitting project
Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.
Hot Tags: GM-A2835Y-120 neon flex, side emitting neon flex, 8x15 mm neon flex, 2835 side view LED strip, 120 LEDs per metre neon flex, 12V 24V neon flex light, 270 degree beam angle neon flex
