Products

GAS2417A Surface Mounted Downward Wall Light 10 W IP65 Die-Cast Aluminum

GAS2417A Surface Mounted Downward Wall Light 10 W IP65 Die-Cast Aluminum

GAS2417A comes from a China-based specification-compliant supplier as an aluminum IP65 fixture for commercial hotel and facade work, sourced from China. Light leaves only through the single recessed milky-white PC diffuser on the underside; the top, sides and ends stay closed so nothing washes upward or leaks sideways, just a continuous soft downward flood. Request quotation.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Description:

A slim, horizontally mounted rectangular housing sits flush to the wall in a matte black finish. Its only light-emitting surface is a single long milky-white PC diffuser recessed into the open underside, sending illumination strictly downward. The top, sides and both ends remain closed, so no light escapes from any other face. In use the fixture produces a soft, even pool of light that fans gently across the wall below, creating a quiet nighttime atmosphere without hard edges or visible source points.

Features:

1. Light exits only through the continuous linear PC diffuser set into the bottom opening; every other surface is solid and sealed.

2. Full-length diffuser delivers a uniform downward flood rather than point sources, segmented sections or sharp cut-off beams.

3. Flat, unadorned rectangular housing with no grooves, vents or decorative lines.

4. Specification-compliant, sourced from China, for commercial hotel and facade applications.

Product parameters:

Model	GAS2417A
Materials	Die-cast Aluminum / PC Diffuser
Power	10 W
Lumen	1000 lm
CRI	>80 Ra
Voltage	AC 100-277 V
Color Temperature	2700K / 3000K / 4000K / 6000K
Finish	Black / White / Platinum Grey / Shiny Grey
Size	L 300 × W 120 × H 55 mm
IP Rating	IP65
Warranty	2 Years
MOQ	100