BE-DUL0901 In-ground Light 9 W IP67 316 Stainless Steel
video
BE-DUL0901 In-ground Light 9 W IP67 316 Stainless Steel

BE-DUL0901 In-ground Light 9 W IP67 316 Stainless Steel

BE-DUL0901 is a 9 W IP67 LED driveover up light built for driveways and vehicle areas, supplied as BE-DUL0901A with a round face cover or BE-DUL0901B with a square face cover. The LED delivers 1050 lm with beam angle choices of 20° / 30° / 38° and color temperature options of 2700 K / 3000 K / 4000 K. Power arrives as 12/24 V DC through the built-in DC driver with its 2 m power cable, and on this model the driver runs at twice the LED rating so the LED starts reliably. Installation takes a D70 cut-out for deck mounting, a 120 mm recessed depth and the Ø79 × 114 mm housing. Driveways, access roads, parking entrances and paved approaches are typical settings, handled by the satin 316 Stainless Steel body. JB2001 and JB3001 junction boxes, a WUAS02 mounting sleeve with a D71 cut-out and the DUAG02F / DUAG02W anti-glare lenses complete the optional list. MOQ is 100 pieces, warranty 3 years.

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

Description:

BE-DUL0901 is specified for surfaces that carry real traffic - driveways, access roads, parking entrances and paved approaches - where a recessed up light has to take wheel loads day after day without shifting, flooding or dimming. The driveover-rated body combines a machined 316 Stainless Steel housing with a flush sealed face, and the satin 316 finish stands up to rain, frost and de-icing salt, keeping the light line clean season after season. Fixed LED means no bulbs to change and no corroded rings to pry out when a unit finally needs attention years down the road.

BE-DUL0901 and BE-DUL0801 ride on one 316 Stainless Steel driveover body: the same Ø79 × 114 mm housing, the same 12/24 V DC built-in driver and the same D70 deck cut-out, so the split between them is output and beam spread. This 9 W version sends 1050 lm through 20° / 30° / 38° beams, tight enough for tree uplighting and facade accents along vehicle routes. For the 8 W twin spreading 750 lm over beams out to 60°, see the BE-DUL0801 8 W stainless steel driveover in-ground light. For the aluminium walkover counterpart in the same 9 W class, for areas without vehicle traffic, see the BE-WUL0901 9 W aluminium walkover in-ground light.

 

Features:

1. 1050 lm of focused output from the 9 W LED, held in 20° / 30° / 38° beams.

2. The built-in 12/24 V DC driver is fed at 2 times the LED rating, through a 2 m power cable.

3. A D70 cut-out and 120 mm of recess receive the Ø79 × 114 mm driveover body.

4. Corrosion resistance comes with the satin 316 Stainless Steel construction and IP67 sealing.

 

Product parameters:

Model BE-DUL0901A BE-DUL0901B
Face Version Round face cover / Square face cover Round face cover / Square face cover
Materials 316 Stainless Steel 316 Stainless Steel
Power 9 W 9 W
Luminous Flux 1050 lm 1050 lm
Beam Angle 20° / 30° / 38° 20° / 30° / 38°
Input Voltage 12/24 V DC (built-in driver) 12/24 V DC (built-in driver)
Color Temperature 2700 K / 3000 K / 4000 K 2700 K / 3000 K / 4000 K
Cut-out D70 D70
Recessed Depth 120 mm 120 mm
Size Ø79 × 114 mm Ø79 × 114 mm
Finish Satin 316 Stainless Steel Satin 316 Stainless Steel
IP Rating IP67 IP67
Warranty 3 Years 3 Years
MOQ 100 100

See our inground light waterproof specification guide for detailed material, IP and beam selection criteria.

 

Face Versions:

Version B (BE-DUL0901B): square face cover, a squared edge that follows deck boards and rectangular paver grids (shown in the second image below).

BE-DUL0901-inground-ip67-9w-stainless-face-b

 

Product Size:

BE-DUL0901-inground-ip67-9w-stainless-dimension-round

BE-DUL0901-inground-ip67-9w-stainless-dimension-square

 

Beam Angle & Illuminance Diagram:

BE-DUL0901-inground-ip67-9w-stainless-photometric

 

Optional Optical Accessories:

DUAG02F frosted glass lens and DUAG02W silk-screen glass lens (Ø42 × 8 mm) are available as optional optical accessories for glare control and beam shaping.

BE-DUL0901-inground-ip67-9w-stainless-optical-accessories

 

Optional Accessories:

BE-DUL0901-inground-ip67-9w-stainless-junction-box

BE-DUL0901-inground-ip67-9w-stainless-mounting-sleeve

Hot Tags: 9W IP67 driveover inground light, 1050 lumen driveway light, 316 stainless steel driveover uplight, stainless steel well light, vehicle area in-ground light, 20 degree beam driveover light, D70 cut-out deck light, driveway up light, round square face well light, satin stainless steel inground light, commercial entrance lighting, recessed driveover luminaire, China inground light supplier

You Might Also Like

(0/10)

clearall