Where Is The Induction Lamp Suitable For

Where are the LED human body sensors suitable for? According to its characteristics, the position that needs to be always on may not be suitable, but the following positions are more suitable.

1. Install LED human body induction lights in corridors

Traditional induction lights are installed in the corridors. They are generally composed of two parts. One is the human body induction panel switch, and the other is the light source. The light source is mostly incandescent. The two are separated. The line and location are well laid out. The tungsten filament in the incandescent lamp cannot withstand frequent switching, so the broken lamp must be replaced every year, and the manual maintenance cost is too high. The LED human body induction lamp has a built-in light source and human body induction device. You only need to install it and screw it into a general E27 lamp holder to achieve the human body induction lamp. When people come, the light is on, and when people go, the light is off. When it is installed at the corner of the upper and lower stairwell, it can sense the people going up and down. In addition, the LED light source has a long life, low voltage operation, and frequent switching has no effect on it.

2. Install LED human body induction lights on the balcony

For a long time, most of the lighting fixtures on the balcony are incandescent lamps or ceiling lamps. The balcony is semi-outdoor. When the lights are turned on at night, mosquitoes and flying insects will turn around the lights. I don’t remember from time to time in life. Turn off the lights on the balcony. Install an LED human body induction bulb or a human body induction LED ceiling light in this position. Both of these problems can be solved. LED is a cold light source, does not contain ultraviolet rays, does not attract mosquitoes, and intelligently senses the human body. On, the light is off after the person leaves, which saves electricity and is convenient.

3. Install LED human body induction lights in the corridors of the property

There are dozens of households in one building. It is also very suitable to install LED human body sensor lights in the public corridors of each floor. In 1 minute, the owner has enough time to open his door and enter the house. Compared with the light bulb that is always on at this location, this saves much electricity. But to install such lamps in this location, the real estate developer or the property can make a decision.

4. Install LED human body induction lights in the utility room

The utility room is too messy. The room is small and dark. You can't see where the switch is when you go in. When you come out, you have to put down the things in your hand and turn off the lights. If you are so troublesome, install LED human body induction lights to solve this problem. Well, install it on the roof of the room. When you open the door and enter, the light will automatically turn on. The light is always on when you are looking for items. Take what you are looking for and go directly. You don’t have to be careful that no one turns off the light. , After 60 seconds, you look back to see that it has been automatically turned off.

5. Install LED human body induction light in the bathroom

Isn't it damp to install LED human body sensor lights in the bathroom? Don't worry, the plastic shell of the lamp body and LED lamp beads are not afraid of humidity as the light source. When the person is in the bathroom, the light is always on. When the person walks away, because there is no need to press the switch, there is no fear of electric shock with wet hands.