LED Big Beam Angle Mini In-ground Recessed Light IP67 DAY04OIL0022EU
Product introduction Detail display 1. Waterproof connector 2. Hight temperature wire 3. Waterproof Nut 4. Steel Clasp 5. Stainless steel cover 6. 6063 aluminum lamp body Actual picture of product INSTALLATION Wiring method 1 Pre-wire laying (low-voltage end divided into positive and negative...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product introduction:
Model | DAY04OIL0022EU |
Materials | 304 stainless steel, aluminum |
Power | 1W |
LED Chip | Epistar LED |
Lumens | 87Lm |
CRI | >80Ra |
Beam angle | 120° |
Voltage | DC12V |
Color | 3000K,4000K,6000K |
Others | Red,Green,Blue |
Size | Ø20XH26mm,Opening size:Ø17mm,depth>42mm |
IP Rate | IP67 |
Warranty | 3 Years |
Detail display:
1. Waterproof connector
2. Hight temperature wire
3. Waterproof Nut
4. Steel Clasp
5. Stainless steel cover
6. 6063 aluminum lamp body
Actual picture of product:
INSTALLATION
Wiring method 1
Pre-wire laying (low-voltage end divided into positive and negative wiring)
1.Cut off the waterproof terminal of the lamp
2.Connect the lights in parallel to the pre-arranged main wire
3.After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V
Wiring method 2
1.Pre-wire laying (low-voltage end divided into positive and negative wiring)
2.Cut off the waterproof terminal of the lamp(Male end)
3. The extension wire is connected in parallel to the pre laid main wire
4. The male end of the waterproof terminal of the lamp is connected with the female end of the extension wire
5.After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V
Wiring method 3
The diversion and extension wire is 0.3 square wire.
1W lamp, it is recommended to connect up to 20 lamps per group
3W lamp, each group is recommended to connect up to 8 lamps per group
Installation method 1: direct opening installation
Wooden board, gypsum board, marble or already done wall, etc., you can directly open the hole to install, as follows
Installation method 2: Installation with embedded parts
Installed with pre-buried parts, generally applied to concrete, lawn, etc. to facilitate fixed lights, as follows:
Hot Tags: LED Big Beam Angle Mini In-ground Recessed Light IP67 DAY04OIL0022EU, China, suppliers, manufacturers, buy, price, quotation, for sale, in stock, made in China
You Might Also Like
-
LED 3W IP67 Square Recessed Light for Garden Yard Co...
-
LED In-ground Recessed Light for Stairs and Corner I...
-
LED Square Mini Recessed Light IP67 Outdoor Spot Lig...
-
LED Mini Outdoor In-ground Recessed Light IP67 Spot ...
-
LED COB Outdoor In-ground Half Moon Recessed Light D...
-
LED COB Outdoor In-ground Recessed Light DC12-24V DA...