LED Step Light Outdoor In-ground Recessed Light Half Moon Design DAY04OIL0037EU
Product introduction Frosted translucent mirror design. Anti-glare tempered glass, resistant to 500KG pressure, uniform light and anti-glare Detail display 1.Tempered glass 2.CREE brand LED 3.Optical lens 4.Shrapnel 5.The main radiator 6.Waterproof nut 7.High temperature wire 8.Waterproof...
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product introduction
Product Parameters:
Model | DAY04OIL0037EU |
Materials | 6063 aluminum |
Power | 1W |
LED Chip | CREE-XBD LED |
Lumens | 95Lm |
CRI | >80Ra |
Light output hole | A1,A2,A3 |
Voltage | DC12-24V |
Color | 3000K,4000K,6000K |
Others | Red,Green,Blue |
Size | Ø35XH47mm |
IP Rate | IP67 |
Warranty | 3 Years |
Frosted translucent mirror design.
Anti-glare tempered glass, resistant to 500KG pressure, uniform light and anti-glare
Detail display
1.Tempered glass
2.CREE brand LED
3.Optical lens
4.Shrapnel
5.The main radiator
6.Waterproof nut
7.High temperature wire
8.Waterproof connector terminals
Product application
INSTALLATION
Wiring method 1
Pre-wire laying (low-voltage end divided into positive and negative wiring)
1.Cut off the waterproof terminal of the lamp
2.Connect the lights in parallel to the pre-arranged main wire
3.After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V
Wiring method 2
1.Pre-wire laying (low-voltage end divided into positive and negative wiring)
2.Cut off the waterproof terminal of the lamp(Male end)
3. The extension wire is connected in parallel to the pre laid main wire
4. The male end of the waterproof terminal of the lamp is connected with the female end of the extension wire
5.After the main wire is connected to the constant voltage power supply/transformer, then connected to 110V/220V
Wiring method 3
The diversion and extension wire is 0.3 square wire.
1W lamp, it is recommended to connect up to 20 lamps per group
3W lamp, each group is recommended to connect up to 8 lamps per group
Installation method 1: direct opening installation
Wooden board, gypsum board, marble or already done wall, etc., you can directly open the hole to install, as follows
Installation method 2: Installation with embedded parts
Installed with pre-buried parts, generally applied to concrete, lawn, etc. to facilitate fixed lights, as follows:
Hot Tags: LED Step Light Outdoor In-ground Recessed Light Half Moon Design DAY04OIL0037EU, China, suppliers, manufacturers, buy, price, quotation, for sale, in stock, made in China
You Might Also Like
-
LED Four Lens Outdoor Wall Light IP65 Waterproof GAS...
-
LED Side Emitting In-ground Recessed Light Outdoor S...
-
LED Square Mini Recessed Light IP67 Outdoor Spot Lig...
-
LED Inground Light Outdoor Recessed Light IP67 Corne...
-
LED IP67 Square Inground Recessed Light DAY05OIL0025EU
-
LED Inground Light Outdoor Recessed Light IP67 Corne...