12x12 mm Three Sides Emitting LED Neon Flex GM-D2835Y-120-X-IPX 12/24 V

12x12 mm Three Sides Emitting LED Neon Flex GM-D2835Y-120-X-IPX 12/24 V

The GM-D2835Y-120-X-IPX three sides emitting LED neon flex washes light out of the top and both side faces of a 12x12 mm silicone profile. The single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K. The GM-D2835CW-120-X-IPX dual color temperature model shares the same body and switches between 2700 K and 6500 K, and the GM-D3838RGB-120-X-IPX version carries 3838 RGB LEDs for full color changing. All three cut every 25 mm or 50 mm on an 8 mm board with a 180 degree beam angle. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs, serving cove ceilings, wall tops, display cases and other lines that need light in several directions. Supplied by HYDGET, luminaire supplier in China.

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction
  • The Full Range
  • Lighting & Bending
  • FAQ

 

12×12 mm Three Sides Emitting LED Neon Flex GM-D2835Y-120-X-IPX

This three sides emitting LED neon flex washes light out of the top and both side faces of a 12x12 mm silicone profile. The GM-D2835Y-120-X-IPX single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. Dual color temperature and 3838 RGB versions are available on the same body.

 

The Full 12x12 Three Sides Emitting Range

 

Three models cover this profile. Pick the single color version with any color temperature from 2700 K to 6500 K, the dual color temperature version switching between 2700 K and 6500 K, or the RGB version for full color changing, and set the sealing grade from IP20 to IP68 per order.

 

Model Input voltage (V) Lamp bead model Number of LED Colour (K) CRI (Ra) Cutting length(mm) Plate width (mm)
GM-D2835Y-120-X-IPX 12V/24V 2835 120 2700-6500 80/90 25/50 8
GM-D2835CW-120-X-IPX 12V/24V 2835 120 2700/6500 80/90 25/50 8
GM-D3838RGB-120-X-IPX 12V/24V 3838 120 RGB Full color 25/50 8

 

 

Lighting & Bending

 

Lighting Direction (Three Sides Emitting)

The LED board sits inside the profile, so light leaves through the top face and both side faces in a 180 degree spread, washing three surfaces from one strip.

 

lighting-direction-diagram-of-12x12mm-three-sided-neon-flex

 

Bends Into Shapes

The silicone body builds star-shaped and radial ceiling patterns, with eight runs meeting at one center joint, and the mounting clips hold every line in place.

 

radial-star-pattern-of-12x12mm-three-sided-neon-flex

 

Profile Dimensions

The profile measures 12 x 12 mm with the light exit on the wide front face, the LED board is 8 mm wide, and the beam angle is 180 degrees.

 

dimension-drawing-and-specifications-of-12x12mm-three-sided-neon-flex

 

Mounting Accessories

Every run is finished with end caps (with or without cable hole) and aluminum mounting clips, and a rigid or flexible aluminum profile carries straight runs and curves.

 

mounting-accessories-for-12x12mm-three-sided-neon-flex

 

 

Frequently Asked Questions

 

FAQ

What does three sides emitting mean on this neon flex?

The LEDs sit inside the profile so light leaves through the top face and both side faces at the same time, washing light out in three directions from one strip.

Where does a 12x12 mm three sides emitting neon flex fit?

Cove ceilings, wall tops, display cases and architectural contours where light must wash out in several directions from a single line.

Which voltages does it run on?

12 V or 24 V, both available on the same profile.

What color temperatures can I order?

Any value from 2700 K to 6500 K on the single color model, or the dual color temperature model switching between 2700 K and 6500 K.

Is there an RGB version?

Yes. The GM-D3838RGB-120-X-IPX model carries 3838 RGB LEDs at 120 per metre for full color changing on the same 12x12 mm three sides emitting body.

Can it bend into shapes?

Yes. The silicone jacket bends into smooth curves and builds straight or radial runs, and the mounting clips hold the shape on the wall or ceiling.

 

Certifications

 

certification-icons-of-12x12mm-three-sided-neon-flex

 

 

 
Start your three sides emitting project

Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.

write to us
Quote and datasheet on request
project support
Layout and bending drawings
WhatsApp
Fast replies for project queries
Contact now
Selection within 24 hours

 

Contact now

Hot Tags: GM-D2835Y-120 neon flex, three sides emitting neon flex, 12x12 mm neon flex, 2835 top view LED strip, 12V 24V neon flex light, 2700K to 6500K neon flex, RGB neon flex 3838, 180 degree beam angle neon flex, silicone neon flex IP68, front glow neon strip

You Might Also Like

(0/10)

clearall