12x12 mm Front Emitting LED Neon Flex GM-D2835Y-120-X-IPX 12/24 V
The GM-D2835Y-120-X-IPX front emitting LED neon flex throws light straight out of the wide front face of a 12x12 mm silicone profile. The single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K. The GM-D2835CW-120-X-IPX dual color temperature model shares the same body and switches between 2700 K and 6500 K, and the GM-D3838RGB-120-X-IPX version carries 3838 RGB LEDs for full color changing. All three cut every 25 mm or 50 mm on an 8 mm board with a 120 degree beam angle. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs, serving cove ceilings, wall washing, facades and other lines that need light straight off the face. Supplied by HYDGET, luminaire supplier in China.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
- The Full Range
- Lighting & Bending
- FAQ
12×12 mm Front Emitting LED Neon Flex GM-D2835Y-120-X-IPX
This front emitting LED neon flex throws light straight out of the wide front face of a 12x12 mm silicone profile. The GM-D2835Y-120-X-IPX single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. Dual color temperature and 3838 RGB versions are available on the same body.
The Full 12x12 Front Emitting Range
Three models cover this profile. Pick the single color version with any color temperature from 2700 K to 6500 K, the dual color temperature version switching between 2700 K and 6500 K, or the RGB version for full color changing, and set the sealing grade from IP20 to IP68 per order.
| Model | Input voltage (V) | Lamp bead model | Number of LED | Colour (K) | CRI (Ra) | Cutting length(mm) | Plate width (mm) |
| GM-D2835Y-120-X-IPX | 12V/24V | 2835 | 120 | 2700-6500 | 80/90 | 25/50 | 8 |
| GM-D2835CW-120-X-IPX | 12V/24V | 2835 | 120 | 2700/6500 | 80/90 | 25/50 | 8 |
| GM-D3838RGB-120-X-IPX | 12V/24V | 3838 | 120 | RGB | Full color | 25/50 | 8 |
Lighting & Bending
Lighting Direction (Front Emitting)
The LED board sits inside the profile with its face toward the front, so light leaves straight through the wide front face in a 120 degree spread, washing the surface in front of the strip.
Bends Into Shapes
The silicone body lays into straight or angled runs, so designers line ceilings with radiating bands of light that meet walls and coves in clean geometric patterns.
Profile Dimensions
The profile measures 12 x 12 mm with the light exit on the wide front face, the LED board is 8 mm wide, and the beam angle is 120 degrees.
Mounting Accessories
Every run is finished with end caps (with or without cable hole) and aluminum mounting clips, and a rigid or flexible aluminum profile carries straight runs and curves.
Frequently Asked Questions
FAQ
What does front emitting mean on this neon flex?
The LEDs face the wide front of the profile, so light leaves straight through the front face in a 120 degree spread instead of out of the sides.
Where does a 12x12 mm front emitting neon flex fit?
Cove ceilings, wall washing, facades, perimeter lines and geometric ceiling patterns where light must wash straight off the face of the strip.
Which voltages does it run on?
12 V or 24 V, both available on the same profile.
What color temperatures can I order?
Any value from 2700 K to 6500 K on the single color model, or the dual color temperature model switching between 2700 K and 6500 K.
Is there an RGB version?
Yes. The GM-D3838RGB-120-X-IPX model carries 3838 RGB LEDs at 120 per metre for full color changing on the same 12x12 mm front emitting body.
Can it bend into shapes?
Yes. The silicone jacket bends into smooth curves and holds clean straight or angled runs, and the mounting clips fix the shape on the wall or ceiling.
Certifications
Start your front emitting project
Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.
Hot Tags: GM-D2835Y-120 neon flex, front emitting neon flex, 12x12 mm neon flex, 2835 top view LED strip, 12V 24V neon flex light, 2700K to 6500K neon flex, RGB neon flex 3838, 120 degree beam angle neon flex, silicone neon flex IP68, top lighting neon strip
