20x20 mm Front Emitting LED Neon Flex GM-F2835Y-120-X-IPX 12/24 V
The GM-F2835Y-120-X-IPX front emitting LED neon flex throws light straight out of the wide front face of a 20x20 mm silicone profile. The single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable anywhere from 2700 K to 6500 K. The GM-F2835CW-120-X-IPX dual color temperature model shares the same body, the GM-F3838RGB-120-X-IPX version carries 3838 RGB LEDs for full color changing, and the GM-F5050IC-90-X-IPX version runs 5050 LEDs with addressable IC effects at 90 per metre. The single color and dual color models cut every 25 mm or 50 mm and the IC version every 33.3 mm or 66.6 mm, all on a 10 to 12 mm board with a 120 degree beam angle. Five sealing options, from IP20 to IP68, cover indoor and outdoor runs. Supplied by HYDGET, luminaire supplier in China.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
- The Full Range
- Lighting & Bending
- FAQ
20×20 mm Front Emitting LED Neon Flex GM-F2835Y-120-X-IPX
This front emitting LED neon flex throws light straight out of the wide front face of a 20x20 mm silicone profile. The GM-F2835Y-120-X-IPX single color version runs 2835 LEDs at 120 per metre on 12 V or 24 V at CRI 80 or 90, with the color temperature selectable from 2700 K to 6500 K and sealing from IP20 to IP68 per order. Dual color temperature, 3838 RGB and 5050 addressable IC versions are available on the same body.
The Full 20x20 Front Emitting Range
Four models cover this profile. Pick the single color version with any color temperature from 2700 K to 6500 K, the dual color temperature version switching between 2700 K and 6500 K, the RGB version for full color changing, or the 5050 IC version with addressable color effects, and set the sealing grade from IP20 to IP68 per order.
| Model | Input voltage (V) | Lamp bead model | Number of LED | Colour (K) | CRI (Ra) | Cutting length(mm) | Plate width (mm) |
| GM-F2835Y-120-X-IPX | 12V/24V | 2835 | 120 | 2700-6500 | 80/90 | 25/50 | 10/12 |
| GM-F2835CW-120-X-IPX | 12V/24V | 2835 | 120 | 2700/6500 | 80/90 | 25/50 | 10/12 |
| GM-F3838RGB-120-X-IPX | 12V/24V | 3838 | 120 | RGB | Full color | 25/50 | 10/12 |
| GM-F5050IC-90-X-IPX | 12V/24V | 5050 | 90 | RGB | Color | 33.3/66.6 | 10/12 |
Lighting & Bending
Lighting Direction (Front Emitting)
The LED board sits inside the profile with its face toward the front, so light leaves straight through the wide front face in a 120 degree spread, washing the surface in front of the strip.
Bends Into Shapes
The flexible body coils into tight circles and smooth rings, and the mounting clips hold every circle in place on the ceiling.
Profile Dimensions
The profile measures 20 x 20 mm with the light exit on the wide front face, the LED board is 10 to 12 mm wide depending on the model, and the beam angle is 120 degrees.
Mounting Accessories
Every run is finished with end caps (with or without cable hole), aluminum mounting clips and a rigid aluminum profile that carries straight runs.
Frequently Asked Questions
FAQ
What does front emitting mean on this neon flex?
The LEDs face the wide front of the profile, so light leaves straight through the front face in a 120 degree spread instead of out of the sides.
Where does a 20x20 mm front emitting neon flex fit?
Feature ceilings, retail displays and architectural rings where circular lines of light become the design.
Which voltages does it run on?
12 V or 24 V, both available on the same profile.
What color temperatures can I order?
Any value from 2700 K to 6500 K on the single color model, or the dual color temperature model switching between 2700 K and 6500 K.
Are there RGB and addressable IC versions?
Yes. The GM-F3838RGB-120-X-IPX model carries 3838 RGB LEDs for full color changing, and the GM-F5050IC-90-X-IPX model runs 5050 LEDs with addressable IC effects, both on the same 20x20 mm front emitting body.
Can it bend into shapes?
Yes. The silicone jacket bends into smooth curves and tight circles, and the mounting clips fix the shape on the ceiling.
Certifications
Start your front emitting project
Send the run length, sealing option and color temperature, and the model pick comes back within 24 hours.
Hot Tags: GM-F2835Y-120 neon flex, front emitting neon flex, 20x20 mm neon flex, 2835 top view LED strip, 12V 24V neon flex light, 2700K to 6500K neon flex, RGB neon flex 3838, 5050 IC neon flex, 120 degree beam angle neon flex, top lighting neon strip
