LB-DT860408 Surface Mounted Downward Wall Light 8 W IP66 Die-Cast Aluminum

Description:

The LB-DT860408 presents a compact rectangular body in die-cast aluminum, finished RAL9016 traffic white with a fine sand-grain matte texture that reads clean and architectural against a textured wall. The three-dimensional square form mounts flush via a separate square base on the side; two small fixing screws sit visibly on the upper front face of the housing. Surface-mounted, it sits tight to the wall and, once night falls, produces a contained downward wash that lights only the wall plane and the ground immediately below it.

Light exits through a single aperture at the base. An 8 W LED module behind a mesh-textured lens throws a precise, even wash downward; the top and all four sides remain enclosed, so there is no upward spill and no side glow. The mounting base is separate from the lamp body, giving clear access for on-site wiring, and the four corners of the base carry pre-drilled screw holes for straightforward fixing.

Features:

1. Single downward aperture only; top and sides closed, no upward or lateral light.

2. 8 W LED module with mesh-textured lens for controlled wall-and-floor wash.

3. Split-type wall-mount base, body and base separate for easy field wiring, four-corner screw holes.

4. IP66.

5. Dimming: Triac, DALI, 1-10V, PWM, DMX512.

6. CCT 2200K-6500K customizable; RGB / RGBW available.

7. Specification-compliant, sourced from China, intended for commercial hotel interiors and building façades.

Product parameters:

See our outdoor wall light selection guide for detailed selection criteria.

Dimensions

Hot Tags: surface mounted wall light, downward wall light, outdoor wall light, exterior wall light, square wall light, ip66 wall light, die-cast aluminum wall light, 8w wall light, China wall light supplier